|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PM500CE SERIES Single, dual and triple output * * * * * * * * Encapsulated package 1 to 10.5W units 230VAC input (115VAC version, see PM500) PCB mounting Short circuit protection EN55022, EN55011 conducted emissions level B EN61000-4-2, -3, -4, -5, -6 immunity compliant Meets EN60950 [ 2 YEAR WARRANTY ] The PM500CE series is an encapsulated, board mountable linear AC/DC power module with the CE mark to demonstrate compliance with the Low Voltage Directive for European applications. The series has single, dual and triple output models with industry standard output configurations operating from an input voltage of 230VAC making the PM500CE series suitable for a wide range of low power PCB applications. The PM500CE series includes 1W to 10.5W modules. Each module has short circuit protection and the 5V outputs also have overvoltage protection. Conservative design and rating of these modules results in reliable operation and long life. The PM500CE design is a low emissions design with tightly regulated outputs making the series especially suitable for test, measurement and instrumentation equipment. SPECIFICATION OUTPUT SPECIFICATIONS Voltage accuracy Voltage adjustability Line regulation Load regulation Temperature coefficient Overvoltage protection (See Note 4) Output power limit Short circuit protection All specifications are typical at nominal input, full load at 25C unless otherwise stated EMC CHARACTERISTICS 1.0% max. Yes See table See table 0.02%/C GENERAL SPECIFICATIONS Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity EN55022 EN55022 EN61000-4-2, EN61000-4-2, EN61000-4-5, EN61000-4-4, EN61000-4-3, EN61000-4-6, Level B Level B criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 criteria 1 level level level level level level 3 4 3 3 3 3 Perf. Perf. Perf. Perf. Perf. Perf. 5V outputs only Typical Switch off/on 6.2V typical Efficiency 130% to 200% FL 100% to 200% FL Isolation voltage Isolation capacitance Approvals and standards 230VAC 10% Case material UL94V-0 Case B1 Case B2 Case B3 47Hz to 400Hz <3.5mA @ 50Hz Weight (See Note 5) 40% typical 3000VAC 50pF Meets EN60950 Non-conductive black plastic 340g (12oz) 408g (14.4oz) 635g (22.4oz) 710,000 hours INPUT SPECIFICATIONS Input voltage range Input frequency range Safety ground leakage current (See Note 2) MTBF (See Note 3) ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating amb. -25C to +71C Non-operating amb. -25C to +85C Derating, 50C to 71C 2.5%/C Cooling Free-air convection cooled Non-condensing 20% to 95% RH Relative Humidity PAGE 88 ENCAPSULATED LINEAR AC/DC POWER SUPPLIES | 1-10.5W AC 1 to 10.5 Watt AC/DC encapsulated modules OUTPUT VOLTAGE OUTPUT CURRENT OVP (4) LINE REGULATION LOAD SINGLE OUTPUT RIPPLE AND NOISE CASE AVAILABLE MODELS 5VDC 5VDC 5VDC 500mA 1000mA 2000mA Yes Yes Yes 0.02% 0.02% 0.02% 0.04% 0.04% 0.05% DUAL OUTPUT 1mV rms 1mV rms 1mV rms B2 B2 B3 PM534CE PM542CE PM545CE 12VDC 12VDC 15VDC 15VDC 15VDC 240mA 400mA 100mA 200mA 350mA No No No No No 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% TRIPLE OUTPUT (1) 0.5mV rms 0.5mV rms 0.5mV rms 0.5mV rms 1mV rms B2 B3 B2 B2 B3 PM537CE PM597CE PM505CE PM565CE PM501CE 5V/12VDC 5V/12VDC 5V/15VDC 5V/15VDC 500/120mA 1000/150mA 500/100mA 1000/150mA Yes Yes Yes Yes 0.02% 0.02% 0.05% 0.02% .05%/.02% .01%/.02% .10%/.05% .01%/.02% 0.5mV rms 1.0/0.5mV rms 0.5mV rms 1.0/0.5mV rms B2 B3 B2 B3 PM591CE PM592CE PM590CE PM593CE 3 Notes 1 2 3 4 5 Triple output models only: the 5V output common is isolated from the 12VDC or 15VDC common. Some units should be derated for operation at 400Hz. Please contact the factory for details. M.T.B.F. figures are based on actual product performance. Consult factory for details. Triple output models only: overvoltage protection is only available on the 5V outputs. All models are only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. CASE B SINGLE OUTPUT MODELS 2.50 (63.5) 0.60 (15.2) 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) CASE B DUAL OUTPUT MODELS 2.50 (63.5) 0.60 (15.2) 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) CASE B TRIPLE OUTPUT MODELS STANDARD PINOUT 2.50 (63.5) 0.60 (15.2) 0.50 (12.7) 0.50 (12.7) SIDE VIEW 0.15 (3.8) - OUT 0.15 (3.8) + OUT 0.60 (15.2) 0.15 (3.8) + 1.62 (41.1) 1.25 (31.8) 0.88 (22.4) + COM COM 5V COM OUT 1.60 (40.6) 3.50 (88.9) 1.60 (40.6) 3.50 (88.9) - NC - OUT + 5V 1.60 (40.6) 3.50 (88.9) INSERTS 4.40 THREAD 0.125 (3.2) DEEP AC AC 1.60 (40.6) AC INSERTS 4.40 THREAD 0.125 (3.2) DEEP AC 1.60 (40.6) AC INSERTS 4.40 THREAD 0.125 (3.2) DEEP AC 1.60 (40.6) B1 B2 B3 2.20 (55.9) 2.20 (55.9) ALL DIMENSIONS IN INCHES (mm) 2.20 (55.9) 0.040 (1.0) DIA. PINS 0.20 (5.1) MIN. DS_PM500CE_20000101.PDF Data Sheet (c) Artesyn Technologies(R) 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. http://www.artesyn.com PAGE 89 |
Price & Availability of PM534CE |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |